2027 Viking 50 Convertible
|Somers Point, NJ
$3,599,000
SKIP THE WAIT!!!
THIS 2027 50' VIKING CONVERTIBLE IS NOW AVAILABLE!!!
THREE STATEROOM, TWO HEAD LAYOUT!
MAN V8 1200CRM (WITH ONLY 54 HOURS)
Key Features....
Palm Beach Towers Hard-Top
Furuno Omni Sonar
Faux Teak Salon Door and Toe Rail
SK14 SeaKeeper
SpotZero Water Maker Filter Combo
Faux Teak Toe Rail
Release Battle Saddle
Garmin Electronics Package
FLIR Thermal Cam
GHOST Tracking and Cam Package
CALL TODAY TO SCHEDULE A SHOWING!!!
MANUFACTURER: Viking
BOAT TYPE: Sports Fishing Boats
MODEL: 50 Convertible
HULL MATERIAL: Fiberglass
YEAR: 2027
CATEGORY: Power
BEAM: 17.08 ft
LENGTH: 50 / 15.24 m
DRY WEIGHT: 66,731 lb
ENGINE 1
MAKE: MAN
MODEL: MAN V8 1200CRM
FUEL: diesel
POWER: 1200 HP
TYPE: Inboard
HOURS: 54
LOCATION: N/A
DRIVE: Direct
PROPELLER TYPE: N/A
YEAR: 2026
ENGINE 2
MAKE: MAN
MODEL: MAN V8 1200CRM
FUEL: diesel
POWER: 1200 HP
TYPE: Inboard
HOURS: 54
LOCATION: N/A
DRIVE: N/A
PROPELLER TYPE: N/A
YEAR: 2026
FUEL TANK CAPACITY: 1200 gallons
FUEL TANK COUNT: 1
WATER TANK CAPACITY: 180 gallons
WATER TANK COUNT: 1
HOLDING TANK CAPACITY: N/A
HOLDING TANK COUNT: N/A
- Viking 50' Convertible
- Twin MAN V8-1200CRM Diesels - 1,200 MHP. Each
- Three-Stateroom, Three-Head Layout
- Forward Stateroom: VIP Crossover Bunk Arrangement
- Satin finish interior throughout
- Horizontal-grain Natural Walnut Interior
- SeaKeeper SK14 Gyro Stabilizer with Helm Display
- Spot Zero Fresh Water / Watermaker Combo Unit (1200 / 2000)
- Watermaker Control Panel on Flybridge
- DC Proportional Bow Thruster
- ElectroSea ClearLine Anti-Fouling System
- Onan 21.5kkW Generator
- Additional Fuel Tank - Total of (3) Tanks
- 24v Fuel Priming Pumps
- Back-up Fuel Transfer Pump Plumbed in Parallel
- Sonar Tube Installation for AME Supplied Omni Sonar
- Sealand Head Systems
- Dockside Water Tee to Fill Tank from Cockpit
- Electronic single-lever controls in Helm Pod
- Release Marine Teak Helm Pod
- Release Marine Helm chairs
- Refrigerated Bridge drink box
- Fresh water on Bridge under starboard seat with shutoff, plus Bridge outlet
- Stainless steel gas springs on Flybridge bench seats
- Split radio box lids
- Removable Flybridge jumpseat backrest
- Grabrail at top of Bridge ladder
- Hardtop with partially scalloped recess overhead
- Teak Cockpit and Mezzanine Decking
- Mezzanine Cockpit with freezer storage and dividers in Mezzanine seat
- (2) Full-length in-sole fish boxes with dividers and split lid
- Transom box plumbed as live well
- Transom coaming with gate and fish box
- Crushed-ice machine with discharge in port Cockpit sole
- Refrigerated Cockpit drink box
- Refrigerated starboard outboard Mezzanine undermount box
- (2) Swivel rod holders at transom corners
- (6) Rod holders in haunches — (3) per side
- Battle Saddle 6 hole HiGloss with Bait Tray, Cup Holders, Tackle Drawer
- (2) 24v 30-amp. Outlets under coaming, (1) per side
- (2) 12v 30-amp. Outlets under coaming, (1) per side
- Costa Cockpit sunshade with carbon-fiber poles
- Costa Cockpit cover
- Faux Teak transom
- Widened teak ladder treads
- Tri-color lights in aft Deck overhang and rope lights under coaming
- CRM-50 Shore power cord reel with White Cablemaster Cord
- Transom swim steps
- Custom hull color — Pamlico Blue Gelcoat
- Custom non-metallic boot stripe
- Viking Blue (Dark Blue) bottom paint
- Faux Teak toe rail
- Tenting, scaffolding and clear coat of toe rail
- Faux Teak Salon door with clear coat
- Deleted bow pulpit; install bow cleats fore and aft
- Custom bow rail
- Anchor bracket in anchor locker
- 300' of Anchor line with 12' of chain and shackle
- Freshwater washdown at bow inside anchor locker
- Salon forward window mask
- Under-counter refrigerators, freezer with icemaker, and refrigerator / freezer drawers
- Four-burner Surface-mount range
- Custom countertop — Architectural Surfaces Sono Mira with full-height backsplash
- Custom Amtico flooring — Arow Vintage Teak with Sugar Maple accent stripping
- Amtico dinette platform to match Galley sole
- Stainless Steel under-mount sink with chrome faucet; mirror backsplash
- Wood dinette table with wood pedestal; AC receptacle under table
- Galley overhang; dimmers on overhead LED lighting
- Salon door with electric door opener
- Amtico flooring throughout Salon and Galley, plus Salon entranceway
- Upgraded sofa — Dewberry-style in Brisa Wishbone with double-stitched cushions
- Motorized blinds
- 43" Flat-screen TV
- Clear-ice icemaker
- Wood top entertainment center; cocktail table
- Wood lambrequins and valances
- Washer and dryer in Companionway
- Costa Canvas carpet runner with step covers
- Vertical wood strips between Companionway wall panels
- Dimmers, wood wire boxes, and wood trim at carpet transitions
- Viking Slumber #8 Mattress
- 22" Flat-screen TV
- Custom headboard — (3) Horizontal panels in Nobilis Bhuti
- Visual Comfort Linea 5 sconces in Antique Nickel above nightstands
- Quartz vanity top — Ashen Grey, leathered, with full-height backsplash
- Custom Head flooring — Stanton Addiction 914
- Brushed aluminum shower door
- Wood face on lower vanity
- Viking Slumber #6 Mattress
- Quartz vanity top — Ashen Grey, leathered, with full-height backsplash
- Custom Head flooring — Stanton Addiction 914
- Wood face on lower vanity
- Dimmers on overhead LED lights
- Viking Slumber #6 Mattress
- Wood locker top
- Frameless glass shower door
- Custom Amtico Head flooring
- Wood face on lower vanity
- Prestige Décor package with custom décor selections
- Custom headliner throughout — Nuance Glacier
- Upgraded Bridge cushion fabric — Spradling Simtex Plata with Pindler Carbon Mast welt
- Upgraded Mezzanine seating fabric to match
- Upgraded Helm and Companion chair fabric to match
- Logo Mezzanine drink holders and Bridge lounge caddy to match
- Custom wallpaper material and installation
- Carpet in Companionway and Staterooms; wrapped hatch carpet
- Brushed nickel hardware and satin nickel light trim throughout
- LED Interior lighting throughout
- Flat-panel horizontal walnut interior doors
- Mattress pads for Staterooms
- Linen Package — White
Navigation and Displays:
- (1) Garmin GMR 2536 xHD3 25kW Radar with 6' Open Array
- (2) Garmin GPSMAP 9219 Multi-function Displays — 19" Glass Helm
- (1) Garmin GPSMAP 8612 Touch-screen MFD, Overhead, Pre-loaded coastal charts
- (1) Garmin GRID 20 Remote Input Device — Vertical
- (1) AVPro SeaLoc Marine HDMI Extender Kit
- (1) 24v-to-48v Step-up Voltage Regulator
- (1) Garmin GXM 54 SiriusXM Weather Antenna
- (1) Garmin USB Card Reader
- (1) Furuno CSH10 83.5 kHz Omni-Directional Sonar
- (1) Furuno 600mm CSH10 Hoist
- (1) Furuno 1.2m CSH10 Shaft
- (1) Furuno 30m 5-Pair Sonar Cable
- (1) Marine Exhaust 38" Flanged Sonar Tube
- (1) AME Custom CSH10 Sonar Fairing
- (1) Furuno SCU001 Bluetooth Remote Control with AME Custom Mount
- (1) Furuno NMEA 2000 Interface
- (1) Sonar Tube Poly Delrin Cover
- (1) Poly-Planar External Speaker
- (1) Garmin GSD 28 Sounder
- (1) Airmar PM411C-LWM Ultra-Wide-Beam Tournament Transducer
- (1) Garmin TD 50 Touch-screen Depth Display
- (1) Airmar DT820BV Depth Transducer and ST850 Speed / Temp Transducer
Auto Pilot and Heading:
- (1) Garmin Reactor 40 Auto Pilot Corepack with GHC 50 Display
- (1) Auto Pilot Installation Kit with Steer-By-Wire Interconnect
- (1) Furuno SCX21 Satellite Compass with AME Custom Mount
- (1) Actisense NGX-1 Gateway
Communications and Connectivity:
- (2) Icom M510 EVO VHF Radios, Flush-Mounted
- (2) Shakespeare Phase III 8' VHF Antennas on Stand-offs, Mounted on PBT E-Rigger Bases
- (2) Furuno NMEA 2000 VHF Interfaces and (2) Poly-Planar External Speakers
- (1) Vesper Cortex M1 Smart AIS Transponder
- (1) Starlink Gen3 Performance with Wedge Mount
- (1) Peplink AP One AX WiFi-6 Access Point
- (1) Garmin BlueNet 20 Network Switch and BlueNet 30 Gateway
- (2) Garmin 40' Network Cables
- (1) NMEA 2000 Network Components
- (1) Scanstrut USB-A / USB-C Charging Port at Helm
- (1) Fusion Apollo MS-RA770 Touch-screen Stereo with Apple AirPlay
- (4) JL Audio M6 Marine LUX 6.5" Speakers — Flybridge
- (1) Fusion Apollo ERX400 Wired Remote — Cockpit
- (2) JL Audio M6 Marine LUX 6.5" Speakers — Haunches
- (2) James Loudspeaker 4" Two-Way Speakers — Gunwales
- (2) JL Audio XDM400/4 100W 4-Channel Amplifiers
- (1) Fusion SiriusXM Tuner with Shakespeare SRA-50 Antenna
- (2) Roku Ultra Media Players with Mounts — Salon and Master Stateroom
- (3) GOST Wide-Angle 1080p Mini-Ball Engine Room Cameras
- (1) Quad Processor with Fuse Block for Camera System
- (1) FLIR MD-625 Fixed Thermal Camera with Hardtop Mount
- (1) Network PoE Isolation Coupler and Fuse Blocks
- (1) GOST Tracking Package
- (4) Lumishore TIX404 EOS Color-Change Transom Lights — 16,875 Lumens Each
- (1) Lumishore Lumi-Link Control Center with EOS LUX Display
- (1) Lumishore iConnect Hub, RS232 Trigger Module and DMX Extension Cables
- (1) Plotter Ethernet Switch, Garmin Conversion Cables and 24v Power Supply
- Custom molded hardtop for 50' Convertible with brushed pipe frame
- Three-sided Costa Clear enclosure to end of Helm, track to track
- PVC flangeless enclosure track on Bridge cap and underside of hardtop
- Rupp 39' three-spreader tournament outriggers with HD solid HDX aft bar
- Rigger locks
- Rupp rollers installed on outriggers in place of eyebolts
- Rupp center rigger with mount
- Pair of Rupp Bigg Rigg manual collapsible back bars with stainless pull pins
- (4) Teaser line collars mounted on outriggers
- (2) Miya Epoch Super US9 24v electric teaser reels with high-speed motors
- Oval radar pod with sliding teaser reel door, brackets and runs
- Power-actuated drop-down electronics box, underside of hardtop
- Three-sided double-aft Bridge rail, leg to leg, with safety rail inboard of ladder opening
- (6) Polished rod holders welded to aft Bridge rail
- (6) Lumitec tri-color LED recessed lights
- Rigid Industries 40" spot-style LED light bar molded into forward edge of hardtop, wired to Helm switch
- Rigid Industries 30" low-profile RDS LED light bar with diffused lenses in custom aft light pod
- OGM LED masthead / anchor light on pole
- Molded navigation lights — port, starboard and stern
- (3) Air vents in forward top panel
- Pair of E-Rigger electric folding antenna bases on fiberglass wedges, wired to Helm switch
- Molded SAT dome mount
- Molded raised pad forward for FLIR thermal camera
- Pair of teaser line fairleads welded to perimeter rail
- Pair of stainless teaser line grommets, underside of hardtop
- Rupp halyard grommets mounted on Cockpit gunnels
- Wire and hookup of recessed lights, spreader lights and teaser reels; bond hardtop
- Release Marine BS6-2 six-hole Battle Saddle gimbal launcher — Solid teak, hi-gloss finish, (6) 15° no-bolt rod holders, stainless steel fairleads, bait tray, cup holders, tackle drawer and cover
- 4" No-bolt stainless steel pedestal assembly for Battle Saddle — 18" pipe
- (2) Release Marine Trillion Series Helm chair packages — 19" x 21", custom Ultra-leather arms and cushions, magnet-fastened cushion sets, no-rock slides, 4" no-bolt stainless steel pedestals and covers
- (2) Teak Helm footboards with easy-adjust support ring and clear non-skid
- Owner's personal gear and items
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.