2018 Chris-Craft Launch 23
|Saint-Paul-de-l'Île-aux-Noix, QC
$114,791
Length
Beam
Engine Make
Engine Power
SHARE
This Launch 23 is a great example of what makes Chris-Craft an American Classic. Stored inside every winter the boat has been very well maintained.
Includes:
- Custom trailer
- Bimini top
- Mooring cover
- Garmin GPS
- Fusion radio w/ JL speakers
Disclaimer
We provide this yacht listing in good faith, and although we cannot guarantee its accuracy or the condition of the boat. The South Jersey Yacht Sales - CCM is pleased to assist you in the purchase of this vessel. This boat is centrally listed by MARINE 360. She is subject to prior sale, price change, or withdrawal without notice and does not imply a direct representation of a specific yacht for sale.
MANUFACTURER: Chris-Craft
BOAT TYPE: Bowrider
MODEL: Launch 23
HULL MATERIAL: Fiberglass
YEAR: 2018
CATEGORY: Power
BEAM: 8.25 ft
LENGTH: 23.42 ft / 7.14 m
DRY WEIGHT: 4,300 lb
ENGINE 1
MAKE: Mercury
MODEL: 6.2L Bravo III
FUEL: unleaded
POWER: 300 HP
TYPE: Inboard/Outboard
HOURS: 60
LOCATION: Center
DRIVE: Stern
PROPELLER TYPE: 3 Blade, Stainless Steel, Duoprop
YEAR:
FUEL TANK CAPACITY: 58 gallons
FUEL TANK COUNT: 1
WATER TANK CAPACITY: 9 gallons
WATER TANK COUNT: 1
HOLDING TANK CAPACITY: N/A
HOLDING TANK COUNT: N/A
With room for all your passengers and a powerful pull to tow their toys, the Launch 23 is always “up” for any seaside watersporting adventure. Take the day and splash around in some waves. When you rest at the dock, prepare for admirers to ogle as they pass by.
- Teak Maintenance Kit
- Teak Caulk Color Choice – black or blonde
- 3 Yr - Chris Craft protection plan
- 5 Yr - transferable hull/structural warranty
- Bow Scuff Plate - SS
- Certifications and Standards - NMMA, ABYC, USCG
- Deck Fill Plates - SS
- Deck - diamond pattern non-skid, fiberglass
- Flag/Pennant - embroidered Chris Craft and US Flag kit w/SS magnetic pole and base
- Color Selections - base gel, Ivory Cream
- Color Selections - boot stripe - multiple color selections
- Gunnel Trim Rubrail - molded PVC w/SS insert
- Hardware - bow and stern eyes, SS
- Hardware - bow light cover, SS
- Hardware - chrome plated SS fasteners
- Hardware - cleats, SS mooring
- Hardware - high end fit n finish w/316L SS and Chris Craft logo
- Hardware - thru-hull fittings, SS
- Hatches - vacuum infused w/ SS shocks
- Hull - Chris Craft trademark Tumblehome design
- Hull - deep V bottom w/flared bow
- Hull - deck joint - mechanically, chemically bonded
- Lighting - navigation lights, SS and international compliance
- Logo - SS, Chris Craft branded
- Swim Ladder - 3 step, SS hidden
- Swim Platform – integral
- Swim Platform Grabhandle - SS
- Beverage Holders - Stainless Steel
- Bolsters - padded gunwhale mounted
- Drains – SS
- Fuel System - EPA compliant
- Grabrails - SS
- Helm - compass, dash mounted
- Helm - dash, gauge and switch panels w/silver perforated panels
- Helm - dash light dimmer
- Helm - ignition safety switch(es)
- Helm - model designator, SS
- Helm - steering wheel, mahogany
- Helm - steering, tilt w/power assist
- Helm - stereo remote, MP3/USB inputs w/Fusion Bluetooth enabled
- Ladder - Stainless Steel boarding
- Lighting - LED courtesy
- Outlets/Input - 12v accessory outlet(s)
- Outlets/Input - USB auxiliary input
- Speakers - JL Audio Sound System
- Stereo System - Fusion, AM/FM/Bluetooth/USB
- Stereo System - Premium upgrade with amp and subwoofer
- Stowage - aft deck compartments
- Upholstery Construction - high density foam with antimicrobials and open cell mesh for drying
- Vinyl - heavy duty, stain/UV resistant
- Vinyl - multiple design/color selections
- Windscreen - curved tempered glass
- Windscreen - Stainless Steel Frame
- Battery Charger
- Battery Switch w/breakers
- Battery Tray(s)
- Bilge Pump - w/autofloat System
- Electric Wiring - color coded and numbered w/Duetch connectors
- Electrical Bonding System
- Teak - bow accents w/SS inserts and Chris Craft SS Logo inlay
- Teak - cockpit floor, full
- Teak - cockpit steps
- Teak - engine walk-over
- Teak - helm footpad / footrests
- Air Intakes - SS
- Anchor - storage under forward seat
- Hull - stringer system and liner, 1 piece fiberglass foam filled for floatation and noise reduction
- Ski Pylon - removable (*pop-up)
- Swim Platform - integral w/ 3-step ladder
- Trim Tabs - Lenco
- Ventilation Grates/Stainless Steel
- Canvas - bimini top w/SS bows and color fast acrylic
- Helm - depth finder - LCD
- Helm - digital gauge package, Chris Craft branded
- Helm - engine controls, Electronic Control - EVC/DTS/DEC
- Helm - Engine control, chrome, side mounted
- Helm - horn, electric trumpet(s)
- Seating - aft bench, molded
- Seating - bucket seats w/integrated SS handrails and flip-up bolsters
- Seating - forward, circular w/forward facing port and starboard lounges
- Seating - portside passenger, chair w/flip-up bolster, swivel and SS integrated grab handles
- Seating - sunpad, large aft w/ transom walk-over (*includes filler pad)
- Stowage - aft cockpit, underseat
- Stowage - bimini, dedicated under engine hatch
- Stowage - bow, port and starboard recessed
- Stowage - coaming w/beverage holders
- Stowage - infloor ski/rod
- Stowage - infloor w/built-in cooler
- Stowage - port and starboard underseat
- Windscreen - tempered glass, center walk-thru
- Bilge System - electric w/blowers
- Electric Wiring - tinned copper
- Engine Compartment Stowage
- Engine Hatch - w/SS hinges and SS gas shocks
- Engine Hatch Insulation - acoustical barrier, Silver Mylar
- Fire Extinguish System - automatic w/manual override
- Fuel System - aluminum tanks w/anti-siphon valves and electric sending units
- Fuel System - EPA compliant
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Similar Listings
