2013 Azimut 45 Flybridge
|Miami, FL
$429,000
Length
Beam
Engine Make
Engine Power
SHARE
The Azimut 45 have a structural design of the hull has been approved by RINA (EC approval category B). This guarantees the structural quality which is enhanced
by the use of innovative materials and technologies.
The hull and all the superstructures (deck, deckhouse, flybridge) have been built using the infusion technique. This construction technology reduces weight and, at the same time, improves construction control and quality. Bow and engine room trays: these are structural trays made through infusion. The key element of this transformation
is the increasingly widespread use of the latest structural adhesives (replacing the traditional clamps).
Fiberglass structures using multiaxial fabric with a powder binder. Neopentilic and isophtalic spray gelcoat. PVC foam is used for the sandwich panels on the hull, deck and superstructures. The engine room and bow anticollision structural bulkheads are made of PVC infused sandwich.
The structural calculations have been checked using FEM analysis. FEM models were generated for the hull structures. This calculation system is used in the aeronautical and car manufacturing sectors. It allows us to simulate the behavior of a boat under extreme conditions, accurately checking the levels of stress and deformation.
DCPD resin was used for the internal layers of the hull and for the superstructures.
Vinylester resins were used for the external layers of the hull (resistance to osmosis and staining, print through).
Disclaimer
We provide this yacht listing in good faith, and although we cannot guarantee its accuracy or the condition of the boat. The South Jersey Yacht Sales - CCM is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Interglobal Yacht Sales. She is subject to prior sale, price change, or withdrawal without notice and does not imply a direct representation of a specific yacht for sale.
MANUFACTURER: Azimut
BOAT TYPE: Flybridge
MODEL: 45 Flybridge
HULL MATERIAL: Fiberglass
YEAR: 2013
CATEGORY: Power
BEAM: 16.08 ft
LENGTH: 45 ft / 13.72 m
DRY WEIGHT: N/A
ENGINE 1
MAKE: Cummins ®
MODEL: QSB 5.9
FUEL: diesel
POWER: 480 HP
TYPE: Inboard
HOURS: 900
LOCATION: Port
DRIVE: V
PROPELLER TYPE: N/A
YEAR: 2013
ENGINE 2
MAKE: Cummins ®
MODEL: QSB 5.9
FUEL: diesel
POWER: 480 HP
TYPE: Inboard
HOURS: 900
LOCATION: Starboard
DRIVE: V
PROPELLER TYPE: N/A
YEAR: 2013
FUEL TANK CAPACITY: 171 gallons
FUEL TANK COUNT: 2
WATER TANK CAPACITY: 132 gallons
WATER TANK COUNT: 1
HOLDING TANK CAPACITY: 74 gallons
HOLDING TANK COUNT: 1
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Similar Listings
