2018 Riva Reets Aquarama
|Mayfield, NY
$285,000
Length
Beam
Engine Make
Engine Power
SHARE
This boat was designed and built by Reets Boatworks in Mayfield, NY. Although it may look similar to the Italian boat it is significantly different.
She is powered by twin Ilmor 6.2 V8’s along with a bow and stern thruster to make dockside maneuvering easy. The integrated swim platform makes for a nice all-around addition to the boat.
The boat is cold molded and 3 layers thick with west system epoxy between each layer. From the waterline down, it has carbon fiber in between each layer and a layer of Kevlar with fiberglass to protect the outside. That is then coated with Pettit Protect impervious bottom paint.
This boat has been used sparingly by the owner and has not been used in 2 summers.
The boat's design is a replica of the original boat frames and lines while using modern materials to improve strength, lower maintenance costs, and improve performance.
The bottom is 3 layers of ¼” Okoume plywood epoxy coated on all sides, bi-axial carbon fiber in-between the 1st, 2nd and 3rd layers. The bottom is wrapped with 6oz fiberglass and then faired using West system 410 microfibers.
The sides and the deck are composed of 3 layers. Two inner ¼” plywood skins will be coated on all surfaces and then planked with 3/8” Mahogany. The sides and deck were then stained traditional colors and varnished with 12-14 coats of Pettit flagship varnish.
All the screws and bolts used in the boat are stainless steel. All the epoxy used is the West System.
The bilge area is Coated with West system epoxy and then varnished with two coats.
Disclaimer
We provide this yacht listing in good faith, and although we cannot guarantee its accuracy or the condition of the boat. The South Jersey Yacht Sales - CCM is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Denison Yachting - Newport Rhode Island. She is subject to prior sale, price change, or withdrawal without notice and does not imply a direct representation of a specific yacht for sale.
MANUFACTURER: Riva
BOAT TYPE: Cruisers
MODEL: Reets Aquarama
HULL MATERIAL: Fiberglass
YEAR: 2018
CATEGORY: Power
BEAM: 9.17 ft
LENGTH: 30 ft / 9.14 m
DRY WEIGHT: N/A
ENGINE 1
MAKE: Ilmor
MODEL: 6.2
FUEL: unleaded
POWER: 430 HP
TYPE: Inboard
HOURS: N/A
LOCATION: N/A
DRIVE: Direct
PROPELLER TYPE: N/A
YEAR: 2018
ENGINE 2
MAKE: Ilmor
MODEL: 6.2
FUEL: unleaded
POWER: 430 HP
TYPE: Inboard
HOURS: N/A
LOCATION: N/A
DRIVE: Direct
PROPELLER TYPE: N/A
YEAR: 2018
FUEL TANK CAPACITY: N/A
FUEL TANK COUNT: N/A
WATER TANK CAPACITY: N/A
WATER TANK COUNT: N/A
HOLDING TANK CAPACITY: N/A
HOLDING TANK COUNT: N/A
Hardware:
- Taylor Made SS Windshield
- Lift rings, lift hardware, lift brackets
- Deck vents, rope chocks, motor cover hinge, rub rail, cutwater, bow light, stern light
- Drain plugs, shift linkage, steering wheel, steering linkages, Hydraulic Steering
- 2 Rudders, rudder stuffing box, driveshaft, shaft log, drive flange, Bronze prop
- Battery cables, dual batteries, all wiring, start switch lights
- Black ribbed Vinyl flooring, Fire extinguisher
- Bow and stern thrusters
- Wood Swim platform
Electronics:
- Simrad 9 with an audio unit
- Humminbird depth Gauge
Powertrain:
- The engines are Ilmor 6.2L 430hp.
- Direct drive stainless steel shafts.
- Freshwater cooling for saltwater.
- Twin aluminum 75 gallon tanks
- The gauges are replica gauges produced by classic instruments in their vintage Riva style.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. Hours listed may vary from actual hours due to recent use. Purchaser is encouraged to verify hours prior to purchase. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Similar Listings
