• Blister resistant modified vinylester resin in entire hull
• Forward anchor locker with built in anchor tube and shelf, painted Awlgrip finish
• Fresh water tank, polythylene
• Fuel tanks (3) 3/16" 5052 H32 aluminum coal tar epoxy finish
• Faired finish aft lazarette
• Gelcoat and Awlgrip underside of deck coaming for improved finish
• High performance isophthalic gelcoat NPG superior gloss flexibility and outstanding weathering characteristics
• Holding tank polyethene
• Hull molded fiberglass construction, using closed cell foam core in selected areas for optimized strength and stiffness while minimizing weight
• Integrated mounting structure for a SeaKeeper, molded in stringer grid
• Lower guard rail painted white with stainless steel insert
• Molded fiberglass cockpit liner with integrated gutter system
• Nonskid for traction and durability
• Patented Michael Peters Stepped V Ventilated Tunnel running surface designed to reduce drag while increasing speed, stability and efficiency
• Rub rail painted white with stainless steel insert
• Stainless steel through hulls - Titanium below waterline
• Stringers, molded fiberglass with integrated wire chases and foam injected in select area
• 316 stainless steel hardware throughout

• Aft bilge pumps connected to float switches for automatic operation and manual operation through on-dash Bocatech switches
• Auto sump box located in console mechanical space
• D/C pressurized freshwater system with freshwater fill on console
• Deck pump-out fitting for holding tank
• Fuel manifold system
• Hooker sea chest live well system with high speed pickup and single 4500 variable speed pump with control knob at helm
• Racing style trim tabs
• PEX plumbing, freshwater system plumbing
• Power assist hydraulic steering
• Whale Gulper pump midship, mounted inside console

• 40 AMP battery charger (2) with separate 30 amp 50' shore cord
• Anchor light / navigation lights
• Batteries, group 31 Odyssey marine.  One (1) per engine and (2) additional house batteries
• Battery distribution panel with battery cutoff and charging system breakers
• Battery voltage display
• Bocatech 12V switching with backlit switch labeling
• Bonded electrical system with transom anode
• Color-coded, labeled and numbered wiring system with corresponding drawings
• LED interior console lighting and under gunwale lighting

• Black acrylic helm panel for flush mount electronics installation
• Compass, flush mounted at helm, lighted
• Dedicated lockable rod storage inside console under lounge seating
• Electrical panel door for easy access to backside of helm and electronics equipment
• Electric freshwater head with Y valve plumbed to holding tank / direct overboard discharge
• Fiberglass entry door to console interior with notched overhead for easy entry.  Heavy duty stainless locking hardware.
• Fiberglass Faux Teak Helm Pod -
• Forward lounge seating integrated into console with dry storage port and starboard with two Gemlux cup/rod holders
• Flush mounted cupholders on helm (4)
• Fiberglass seating module with slide out cooler and cushion. 
• Upholstered bench seat with tackle storage and (6) Gemlux rod holders with (4) cup holders installed on bench seat backrest
• Glove box to port with USB charging outlets and 12V plug
• Molded in vanity with freshwater sink and retractable shower wand
• Power coated pedestal with composite ladder treads for easy access into console
• Recessed fiberglass footrest with storage

• Bow rail, aluminum, recessed and low profile
• Durable white outdoor upholstery for console lounge, bench seating, coaming bolsters and cockpit cooler seating
• Fish boxes insulated port aft and starboard aft with Y valve plumbed to Whale Gulper pump in aft lazzarette.  Forward fishbox and port/stbd deck boxes plumbed to automatic sump box located in the mechanical compartment inside console.
• Freshwater wash down with hose bib located under gunwale and anchor locker
• Heavy duty gasketing for all hatches with installation detail molded in for a perfectly fit seal
• Pressurized transom livewell with fiberglass lid
• Padded cockpit coaming bolsters
• Port side dive door with removable stainless swim ladder
• Rod holders cockpit coaming, (6) stainless Gemlux
• Sea water washdown
• Self-bailing cockpit with large cockpit scuppers
• Stainless 8" pop-up spring and forward cleats.  Stainless hawse pipe and fixed cleat aft in cockpit
• Stainless steel gas pistons on deck hatches
• Side storage lockers port and starboard

GELCOAT & PAINT:

• Boot Stripes, Paint - WHITE Boot Stripe w/ FLAG BLUE Accents (2)Bottom Paint - Color - FLAG BLUE
• Hull Color, Gelcoat - VALHALLA GREY
• Livewell Color - ARISTO BLUE

CUSTOM TOP OPTIONS:

• Custom Palm Beach Towers Marlin Tower w/ Accessories 
• Underside Hardtop to Match Hull Color - VALHALLA GREY
• Underside Tower Sunshade - Color -  VALHALLA GREY
• Pancake Style Teaser Reels Recessed in Hardtop (2)

 FISHING ACCESSORIES:

• Electric Reel Outlets (2), 12V Each
• Rod Holders, Swivel Gemlux (6) 
• Rod Holders, Additional Gemlux Installed in Coaming & Transom (6) 
• Rod Holders, Additional Gemlux Installed in Forward Lounge (6) 
• Rod Holders, Additional Gemlux Installed Inside Console (4) 
• Rod Storage, Mounted Under Gunwale
• Clear Transom Livewell Lid

 CONSOLE:

• ProCurve Solid Curved Glass Enclosure for Helm
• Edson Steering Wheel w/ Power Knob - Carbon Fiber

 SEATING

• Integrated GG Schmitt Transom Seats
• Release Marine Teak Helm Chairs (3) w/ Armrests, Electric Slides & Bolsters Forward Bench Seating w/ Backrests (2) and (2) Cupholders
• Upgraded Release Marine Jump Seat Backrests (2)
• Helm, Aft Facing Mezzanine Seating w/ Armrests/ Tackle Storage & Cooler
• Plano Box Storage in Backrest

 UPHOLSTERY:

• Costa Marine, Forward Seating Module Covers - WHITE 
• Costa Marine Cover Package, Includes: Console/ Lounge/ Helm Seating - WHITE Diamond/ Bentley Stitching
• Upgraded Upholstery for Seating & Coaming 

ENHANCEMENTS & CONVENIENCE:

• Anchor Chute w/ SS Plow Anchor plus Windlass
• Arid Dry Bilge System (2 zone)
• Bow Thruster
• Engine Flush System, Reverso Automatic
• Extra Battery, Additional Odyssey Group 31
• Macerator Pump, Holding Tank Overboard Discharge
• Seakeeper, SK 3
• Refrigerate Aft Facing Mezzanine Bench Drink Box
• Faux Teak Helm Pod
• Faux Teak Toe Rail
• Faux Teak Transom
• Fiberglass Under Gunwale Forward Side Lockers (2) Port & Starboard
• Deck Box LED Lighting to include ALL Deck & Coaming Boxes
• Removable Stainless Dive Ladder
• Underwater Lights (4)
• USB Charging Outlets & 12V Power Outlet Inside Console
• Water Delivery Kit w/ out Anchor

CUSTOM OPTIONS:  VALHALLA BOATWORKS

• Dri-Deck for ALL Storage Compartments; Lockers; Fishboxes
• Additional Pop-Up Cleats (2)
• Install SeaDek Flooring Inside Console
• Supply & Install Powder Coated Grab Rail Inside Console for Easy Exit

 CUSTOM OPTIONS:  OYSTER HARBORS MARINE

• Supply & Install Rod Holders Inside Console on Outboard Sides of Berth
• Install Helm Deck Flooring Pad
• Supply & Install Rigging Kits for Outriggers & Center Rigger
• Supply & Install Rigging Kits for Teaser Reels
• Remove ALL Mercury Decals & Logos from ALL Engine CowlingsRemove ALL Valhalla Decals & Logos from Hull Sides
• Supply & Install Boat Name & Hailing Port on Transom
• Supply & Install Yacht Club Burgee on Console - Port & Starboard Sides

• Garmin GPSMAP 8617 17" MFD (3)
• Garmin GSD28 Sounder
• Airmar R109LHW Transducer 2 KW
• Garmin Reactor 40 40 Corepack Autopilot
• Icom M510 VHF Marine Radio
• Icom OPC-1541 HM-195 Command MIC
• Icom MBF7 VHF Flush Mount Kit
• SITEX AIS  MDA-5 Class B 
• Fusion Stereo MS_RA770 APPOLO Series Touchscreen
• JL Audio M6 (12) Speakers with Amplifier and Subs
• Garmin MXM54 Weather Antenna
• FLIR M332 Thermal Camera with GYRO Stabilization
• Travision TV3 Empty Dome to House the 4 GPS Antennas.  Painted Valhalla Grey 
• Upgraded 2kW Transducer 
• Install Dam for 2kW Transducer
• AME Installed Nautic Alert V Tracker Satellite Tracking System 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Engine and generator hours listed are based on the information provided by the owner and/or the readings from the hour meters at the time of the original listing. The broker does not guarantee the accuracy of the reported hours. It is the responsibility of the purchaser and/or their agent to verify engine hours, warranties (express or implied), major overhauls, and all other details noted in the listing.